Testing equipment for the determination of resistance to cracking of geosynthetic barriers due to environmental stresses (Stress Cracking) according to standard UNE EN 14576, equipped with a 20 independent positions bench for tensile test of the test pieces. More Info
Category Archive for: General
The ARRB G3 Walking Profiler reads the pavement profile, indicating the International Roughness Index (IRI), texture MPD (optionally), and distance. Unlike previous versions, the new WP uses a 3-axis accelerometer mounted on a rolling platform, which allows the measurement of the pavement longitudinal profile. This platform is independent of the car, which means that it
Equipment for the aging of asphalt sample by storage under controlled pressure and temperature, to determine the tensile stiffness test after saturation conditioning (SATS) according to EN 12697-45. The equipment has been designed for the conditioning of saturated asphalt specimens by prolonged storage for 65 hours in a pressure vessel partially filled with water at
Equipment for the conditioning of two asphalt specimens in an atmosphere controlled by aging of a forced flow of ozone as oxidizing agent according to draft standard prEN 12697-52 (procedure B.2). More info
Pilot plant developed for the design and production of modified bitumens in the laboratory. It is a very compact unit designed to occupy as little space as possible. It allows modifying bitumen with different polymers to obtain material with specific requirements. The basic principle of modified bitumen of design and production is to mix bitumen
Direct cutting device 6 x 6 cm and 5 cm diameter. With lever arm and weights. Microprocessor control and 7-inch touch screen. Programmed to perform consolidation tests, fracture and determining the residual resistance. No computer needed for operation. More info